Americos Industries Inc.

Americos Wettex 800 (APEO Free, Nonionic Wetting Agent)

Introduction :
Americos Wettex 800 is a nonionic surfactant based, powerful wetting agent, derived from alkyl polyethylene glycol ethers family. It also contains higher alkylene oxides in small amounts. At room temperature it is a cloudy liquid and it tens to form sediment. It becomes clear liquid at 50°C. By virtue of the high level of surface activity, Americos Wettex 800 finds applications in textiles and in detergents and cleaners for household, industrial and institutional use.

Advantages :

• It is a very effective wetting agent. It can be employed in a variety of refining, mixing, impregnating and surface treatment processes
• Because of its nonionic nature, Americos Wettex 800 can be combined with anionic, cationic and nonionic surfactants and auxiliaries.
• Its compatibility with dyes, pigments, protective colloids, thickeners and other substances with molar mass in the upper range is also very good.
• It also performs well as emulsifier and it can be combined with other emulsifiers
• It can be used to disperse the solids generated by reactions. It can be used alone or in combination with protective colloids
• It is a powerful wetting agent for denim
• Americos Wettex 800 can be used to formulate acidic, alkaline, and neutral cleaners that satisfy many requirements

Note:
High concentrations of inorganic salts, bases and acids may impair the solubility of Americos Wettex 800

Sequestering Agent Manufacturer,Textile Wetting Agents,Sequestering Agent Supplier,Textile Wetting Agents India Properties :

Storage & Handling Precautions :

• In accordance with the current practices, the use of Americos Wettex 800 produces no ill effects. It also does not exert any harmful effects on health, provided they are used properly
• Protect the eyes and avoid prolonged contact with the skin. Safety glasses should be worn when handling these products in their undiluted form
• Store in a cool place, avoid storing in direct sunlight
• The usual precaution for chemicals should be observed
• Shelf life: If Americos Wettex 800 is stored properly, it has a shelf life of at least two years in their original packing.

Technical Service :
Information covering specific application of this product is available. Americos Industries will work with customers to enhance processes and solve problems. Let us know what you need and we will assist you.

Americos Dispersol DX
Introduction :
Americos Dispersol DX is anionic dye dispersing agent. It prevents dyestuff agglomeration and prevents precipitation in dye bath.

The Features of Americos Dispersol DX are :

• Dispersing agent for use in the dyeing of polyester
• Dyeing polyester/wool blends with disperse and acid or 1:2 metal-complex dyes or corresponding dyestuff blends
• Dispersing agent in dyeing with vat dyes
• Dyeing of triacetate fibers with disperse dyes
• Low foaming
• Stable at HT and shows no retardant influence on dyestuff

Properties :
Dyeing of polyester and triacetate fibers with disperse dyes
Americos Dispersol DX is a dispersing agent used to disperse dyes in the preparation bath before dyeing and to maintain the stability of the dispersion during dyeing. The amounts required are 2 g/l Americos Dispersol DX in the preparation bath and 0.5-2 g/l in dye baths, depending on depth of shade and liquor ratio.

Application Method :

1. Preparation of the dye bath liquor. Sprinkle disperse dyes into 10-15 parts soft water (30^° - 40 ^°C) containing dissolved Americos Dispersol DX and stir continuously. Dilute further with water. This liquor is then added to the dye bath.
2. Application in the dye bath to maintain the stability of the dispersion during dyeing, add 0.5-2 g/l pre-dissolved Americos Dispersol DX, depending on depth of shade and liquor ratio, to the warmed dye bath. Then add the normal amounts of carrier required for dyeing at the boil or leveling agents required for HT dyeing. Add thoroughly dispersed dye as usual.

Dyeing cellulosic fibers with vat dyes
When dispersing large quantities of dyes, it is advisable to add 1.5-3 g/l Americos Dispersol DX. When working with vat dyes, Americos Dispersol DX improves the levelness of pigmentation, especially on circulating liquor units. For the exhaust, pigmentation and half-pigmentation processes, add 1.5 - 3 % Americos Dispersol DX

Dyeing polyester/wool blends
Americos Dispersol DX is required to ensure that the dyes remain finely dispersed throughout the dyeing process. This is particularly important when dyeing wound packages and at short liquor ratios. Americos Dispersol DX also has good leveling action on 1:2 metal complex dyes.

Application Method :
Heat the liquor to 30-40 °C and add 1-2 % Americos Dispersol DX (pre-dissolved). Then add acetic acid and the carrier. When the acid and auxiliary have been dispersed evenly, add the well-dispersed or dissolved dyes. Dye and finish as usual.

Americos Dispersol DX

Anti Foaming Agent,Dispersing Agent Manufacturers,Concentrated Anti Foaming Agent,Dispersing Agent Suppliers

 Introduction :
Americos Dispersol DX is anionic dye dispersing agent. It prevents dyestuff agglomeration and prevents precipitation in dye bath.

The Features of Americos Dispersol DX are :

• Dispersing agent for use in the dyeing of polyester
• Dyeing polyester/wool blends with diwsperse and acid or 1:2 metal-complex dyes or corresponding dyestuff blends
• Dispersing agent in dyeing with vat dyes
• Dyeing of triacetate fibers with disperse dyes
• Low foaming
• Stable at HT and shows no retardant influence on dyestuff

Properties :


Dyeing of polyester and triacetate fibers with disperse dyes
Americos Dispersol DX is a dispersing agent used to disperse dyes in the preparation bath before dyeing and to maintain the stability of the dispersion during dyeing. The amounts required are 2 g/l Americos Dispersol DX in the preparation bath and 0.5-2 g/l in dye baths, depending on depth of shade and liquor ratio.

Application Method :

1. Preparation of the dye bath liquor. Sprinkle disperse dyes into 10-15 parts soft water (30^° - 40 ^°C) containing dissolved Americos Dispersol DX and stir continuously. Dilute further with water. This liquor is then added to the dye bath.
2. Application in the dye bath to maintain the stability of the dispersion during dyeing, add 0.5-2 g/l pre-dissolved Americos Dispersol DX, depending on depth of shade and liquor ratio, to the warmed dye bath. Then add the normal amounts of carrier required for dyeing at the boil or leveling agents required for HT dyeing. Add thoroughly dispersed dye as usual.

Dyeing cellulosic fibers with vat dyes
When dispersing large quantities of dyes, it is advisable to add 1.5-3 g/l Americos Dispersol DX. When working with vat dyes, Americos Dispersol DX improves the levelness of pigmentation, especially on circulating liquor units. For the exhaust, pigmentation and half-pigmentation processes, add 1.5 - 3 % Americos Dispersol DX

Dyeing polyester/wool blends
Americos Dispersol DX is required to ensure that the dyes remain finely dispersed throughout the dyeing process. This is particularly important when dyeing wound packages and at short liquor ratios. Americos Dispersol DX also has good leveling action on 1:2 metal complex dyes.

Application Method :
Heat the liquor to 30-40 °C and add 1-2 % Americos Dispersol DX (pre-dissolved). Then add acetic acid and the carrier. When the acid and auxiliary have been dispersed evenly, add the well-dispersed or dissolved dyes. Dye and finish as usual.

Storage & Handling Precautions:

• In accordance with the current practices, the use of Americos Dispersol DX produces no ill effects. It also does not exert any harmful effects on health, provided they are used properly
• Protect the eyes and avoid prolonged contact with the skin. Safety glasses should be worn when handling these products in their undiluted form